This standard range of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. These were particularly developed for use with state-of-the-art servo motor technology, providing tight integration of the motor to the unit. Angular backlash of less than 1 arc-a few minutes is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center range) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of motor couplings and installation flanges are available for assembly to virtually all servo motors, and the hollow bore output can be used to mount result shafts, pinion shafts, or other drive elements.
Regular applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and digital line shafting. Industries offered include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and reduce the expenditure for precious installation space.
The helical-worm servo gearmotors are designed in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you with exceptional attenuation properties for the procedure of your systems with low levels of vibration. This is usually due to the longitudinal app of pressure on the insight shaft. This allows torque impulses to end up being prevented successfully and for maximum results in conditions of running smoothness and sound reduction to be performed.
Both the gear unit, and the synchronous servomotor are based on our modular system. This allows you to have fully individual configuration possibilities for each application. One matter is certain – Our servo gearmotors are real specialists for very specific requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a gear in the type of a screw, also referred to as a worm, meshes with a worm gear. These gears are typically created from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm equipment reducers is certainly that they create an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox has right hand threads; to change the path of the result, a left-hand thread worm gearbox is necessary.
Sometimes a motor’s capability could be limited to the main point where it needs gearing. As servo manufacturers develop better motors that can muscle applications through more difficult moves and generate higher torques and speeds, these motors require gearheads equal to the task.
Additional details regarding Worm Drive Servo could be located below.